Assetize

All learning series · Manage add-on · Part 1

Asset Configuration Manager

Distinguish the approved equipment configuration from what is actually installed.

Start here

Confirm this product is ready, then use the lesson. The readiness checks are the gate for configuration, for a first journey and for production.

  1. Are you ready to use Asset Configuration Manager? Licensing and AppPoints, the records that must exist, and three checklists.
  2. Basics
  3. Configuration
  4. Practical example
  5. Practice and verify
  6. Advanced concepts

Are you ready to use Asset Configuration Manager?

Asset Configuration Manager tracks a build position and the life of a component on a parent asset. Aviation uses its own industry-solution modules. A build model in ACM is not an aircraft record in Aviation.

Before configuration

ACM is a Manage add-on at Premium or Limited. The 9.2 install table does not list an ACM install quantity. Have a model with positions before you create a serialized asset against it.

Before the first successful journey

One model, two positions, an allowed part on each, and one parent asset built from that model.

Before production use

Position rules and life limits have an owner. Removing a component updates the build you will audit.

Licensing, entitlement and AppPoints

Asset Configuration Manager is a Maximo Manage add-on. The MAS 9.2 licensing guidance prices it at Premium, or at Limited when the three modules include the ACM modules. The modules page lists Asset Configuration Manager and Flight Logs. There is no ACM install quantity on the install table. Aviation is a separate industry solution with a longer module list, including configuration, flight-log exchange, orders, motor pool, operations, safety and warranties. Entitle ACM and Aviation separately when both are installed. The guidance’s definition of an ACM asset is the parent, such as an aircraft or a locomotive, not an engine, an axle or a train made of several parents.

Keep four facts separate for Asset Configuration Manager. Entitlement is the proof of entitlement and the License Information for IBM Maximo Application Suite. The MAS 9.2 licensing guidance supplements that agreement. Available AppPoints are the pool shown on the AppPoints Usage dashboard: Suite administration, then Suite, then Administration, then AppPoints Usage. Assigned access is the security group together with the user type on the person: Limited, Base or Premium, and Authorized or Concurrent. Consumption is what that assignment draws. Authorized users and administrators reserve AppPoints continuously. Concurrent users draw AppPoints while they are signed in. Install AppPoints stay reserved for the life of that environment. A non-production install of a component draws no install AppPoints when the same component is already installed in production. Administrators and User Management users open the dashboard. Other people need the LICENSEUSAGE security group. Compliance enforcement and idle timeout sit on the dashboard Configuration tab and are suite-administrator settings.

The same guidance publishes these user conversion ratios: Limited is 5 AppPoints for one concurrent user and 2 for one authorized user; Base is 10 concurrent and 3 authorized; Premium is 15 concurrent and 5 authorized; an administrative Base user is 10 AppPoints and an administrative Premium user is 15, both as authorized users. A Base administrator who already reserves 10 AppPoints can be given Premium application access with no further AppPoints. Those ratios were read from the MAS 9.2 licensing guidance on 18 October 2026. Your agreement sets how many AppPoints you purchased. An application that opens shows that the component is deployed. Read the proof of entitlement and the dashboard as well.

Installed and enabled applications

Confirm the ACM applications open and a build model can be saved. Flight Logs is a second ACM module. Aviation applications, if present, are not a substitute. Installed means the ACM application opens. Configured means a model has positions and allowed parts. Usable means a parent asset shows the component fitted in a position.

Foundation configuration

You need the site, the parent asset, and the items or parts the positions allow. Serial numbers matter because life sits on a specific component. Classifications separate models. Meters and life limits are ACM data on the component. A flight log is a later record and needs the Flight Logs module. An airworthiness process that belongs to Aviation stays in the Aviation course.

Product configuration

Create the model, the positions and the allowed parts, including quantity rules. Create the parent asset from the model and fit a component to a position. Grant build editors and maintenance users different groups. Review the default that allows any part in a position before you load a controlled model.

Infrastructure and integration

ACM runs in Manage. A manufacturer’s load file or a flight system is an external input with its own format and access. No optimization service is required to fit a component.

Data and operational readiness

The first journey needs one model, two positions, one allowed part on each, one parent and one fitted component. Then remove or replace the component and read the build back. An empty position list is configuration. A missing serial is data. A missing application is the add-on or the group. An Aviation screen is the wrong product.

Setup order for a build

  1. 1. ACM entitlement Premium or Limited. Separate from Aviation.
  2. 2. Model, positions and allowed parts The rules before any serial is fitted.
  3. 3. Parent asset The guidance’s asset is the parent, not the component.
  4. 4. Fit, then read the build back The position shows the serial that is installed now.
Readiness for Asset Configuration Manager
RequirementWhy neededMandatory/Conditional/OptionalWhere to configure or verifyMinimum working exampleVerification procedureConsequence if missingRemediationSource
ACM add-on entitlement, separate from AviationACM is an add-on. Aviation is an industry solution. Each has its own modules.MandatorySuite administration → Suite → Administration → AppPoints Usage. Manage → Security → Security Groups, and the suite user type.A configuration engineer on Premium, or Limited with ACM inside the three modules.Confirm the dashboard tier, and confirm Aviation access is a separate decision.Aviation groups are used as the ACM licence.Grant the ACM applications on their own tier.Licensing in Maximo Application Suite 9.2
ACM applications openThe build is recorded in ACM, including the Asset Configuration Manager module.MandatorySuite administration → Catalog, Manage workspaceThe model application opens.Create a training model and see it in the list.Only Aviation menus are present.Deploy ACM, or use this course only where ACM is the installed add-on.Modules and applications in Maximo Application Suite 9.2
A model with positions and allowed partsThe build is valid only where the model allows the part.MandatoryModels, positions, allowed items, quantity.Model TRAIN-1, positions AXLE-1 and AXLE-2, each allowing one axle item.Save the model and read both positions back.A serial can be typed into a position the model does not have.Create the positions and the allowed parts before the asset.Modules and applications in Maximo Application Suite 9.2
A parent asset built from the modelLife and build are calculated for the parent the guidance defines.MandatoryAssets, model, site.Asset PARENT-1 on the training site, model TRAIN-1.The asset shows the model’s positions.Components exist and there is no parent to hang them on.Create the parent from the model.Modules and applications in Maximo Application Suite 9.2
A serialized component fitted and then read backThe current build is the serial in the position now.MandatoryThe build position on the parent.Serial AX-100 fitted to AXLE-1.Query the build and see AX-100 in AXLE-1.The position is empty after a save that looked successful.Fit the serial again and read the position back before you continue.Modules and applications in Maximo Application Suite 9.2
Removal or replacementThe audit value is the history of what was fitted.MandatoryThe remove or replace action on the position.Remove AX-100 and fit AX-101.The current build shows AX-101, and the history still names AX-100.The position changes and the previous serial disappears.Use the product’s remove and fit actions so the history remains.Modules and applications in Maximo Application Suite 9.2

A. Ready to configure

  • ACM is entitled at Premium or Limited and is not being inferred from Aviation.
  • The ACM application opens.
  • A site and a part item exist.
  • You have a model name, two positions and one parent asset number.

B. Ready for the first end-to-end journey

  • The model saves with two positions and allowed parts.
  • The parent shows those positions.
  • A serial fits in one position and reads back.
  • Replacing it leaves the previous serial in the history.

C. Ready for production operation

  • Models and life limits have an owner.
  • Flight logs, if you use that ACM module, are a separate data feed with an owner.
  • Aviation processes stay on the Aviation entitlement and menus.
  • Position rules are tight enough that an unapproved part cannot be saved in a controlled position.

Sources for this readiness check

Licence statements come from the IBM topic named on the row. Installation of a component is a separate check from entitlement.

Aircraft maintenance journeys and worked examples

Before you start

MAS learning path. Match the component documentation to your installed release and maintenance build before configuring it.

  • ACM available with training models and configuration-managed assets.
  • A small parent assembly with two example positions and known allowed items.

IBM sources + Assetize exercise

01 · Basics — Understand the building blocks

ACM models configuration-managed assets using models, build positions and allowable components. The model defines the permitted structure; the asset records describe the actual installation.

The Build Data Interpreter evaluates configuration and reports issues. A physical part fitting a position does not establish that the recorded configuration is valid.

Topics in this series

  • Models and positions
  • Allowed components
  • Actual configuration
  • Build Data Interpreter
  • Variants and lifecycle history

02 · Configuration — Work through the setup

Use a training environment and match the actions to the IBM guide for your installed build.

  1. Inspect a training model and its positions, permitted items and quantity rules.
  2. Create or select a training asset based on that model.
  3. Record an allowed component in a position using the supported installation process.
  4. Run the documented validation process and review the resulting configuration status.
  5. In a disposable copy, create a quantity or allowed-item mismatch and inspect the reported issue. Restore the valid configuration afterward.

03 · Practical example

Fictional teaching example

A fictional compressor assembly permits one motor in its motor position. Recording two installed motors is a configuration error even if both serial numbers exist as valid assets.

04 · Practice and verify

Compare the model, current asset configuration and validation findings for a valid and invalid installation.

Expected result

The invalid case produces a traceable configuration issue, while the corrected case satisfies the model rules.

Common mistakes

  • Treating the model as a list of current assets.
  • Declaring validity before the configuration check finishes.

05 · Advanced concepts

Explore variant applicability, component history, meters and maintenance requirements. Keep model revisions separate from physical installation events.

IBM references

Product explanations link to IBM sources. Scenarios and exercises are original Assetize teaching material. Reviewed 2026-10-01.

Maximo ecosystem overview · Manage learning paths · Practice data in Workbench